Privacy Policy
Privacy NoticeWe know that you care how information about you is used and shared and we appreciate ...More
Return Policy
All returns will be subject to a 20% restocking fee. If Pure Acceleration has, in error, shipped ...More
Terms of Use
TERMS AND CONDITIONS OF USE Welcome to our online store. We are pleased to provide you with the ...More
DYNOJET QUICK SHIFTER (DQS) SENSORS (Dynojet)
|
|||
Parts Unlimited Street 2010 Starting at $219.95 |
|||
- Description
- Features
- Notes
- Request Information
- Send to a Friend
FOR POWER COMMANDER V
- Push or pull-types available with universal mounting kit
- Mount one end to the shift lever and the other to a fixed point on the chassis
- Power Commander Control Center software lets you set engine dead time during upshifts and minimum rpm for system operation
- Plugs directly into the Power Commander V USB expansion port with no re-wiring required
- The linear travel sensor kit works with bikes that have no shift rod, or on those the shift rod sensor will not fit
- Dynojet’s Quick Shifter (DQS) kit allows full-throttle, clutchless upshifts in racing and performance riding applications
- Races are won or lost in fractions of a second
- Requires modification of gear-linkage tie-rod
- The shift rod pressure/tension sensor kit is a universal sensor that mounts to the shift rod in either a push or pull configuration
Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.
To order either of the above sensors, you must find the correct direction of movement during an upshift (push or pull). For the shift rod/pressure/tension sensor, press on the shift lever in the direction of an upshift to see if the rod is pushing or pulling on the clevis on the shift shaft. For the linear travel sensor, also move the shifter for an upshift. If movement is down, a pull sensor is needed. If movement is up, a push sensor is required.
To order either of the above sensors, you must find the correct direction of movement during an upshift (push or pull). For the shift rod/pressure/tension sensor, press on the shift lever in the direction of an upshift to see if the rod is pushing or pulling on the clevis on the shift shaft. For the linear travel sensor, also move the shifter for an upshift. If movement is down, a pull sensor is needed. If movement is up, a push sensor is required.